Cleaners and Inhibitors
Superior Corrosion Protection and Sacrificial Defense for Industrial Hardware
- Process Overview
Engineering Contaminant-Free Substrates for Unbreakable Plating Bonds
Every high-performance electroplated finish depends on the chemical cleanliness and activation of the underlying metal surface. Our cleaners and inhibitors are engineered to rapidly emulsify heavy rolling oils, stamping lubricants, shop soils, and stubborn oxide scales without etching or weakening the base substrate. By integrating specialized corrosion inhibitors into our acid pickling and alkaline cleaning baths, we prevent flash rusting and hydrogen embrittlement, ensuring your parts enter the plating tank completely activated and free of adhesion-destroying residues.
- Where It’s Used
Trusted Across Heavy Manufacturing, Stamping, and Precision Finishing Lines
From heavily oiled automotive stampings and heat-treated fasteners to delicate brass sanitary castings, Mepco cleaners and inhibitors prepare every substrate for zero-defect electroplating.
Stamped steel automotive brackets, chassis parts, and springs
Cast brass, zinc die-castings, and sanitary hardware fixtures
Heat-treated industrial fasteners, wire, and machined components
Need a process that isn’t listed?
Our R&D laboratory develops customised formulations for your exact substrate and finish.
Soak cleaners use chemical surfactants, alkalinity, and heat to lift and emulsify bulk oils and greases. Electrocleaners follow soak cleaning, using anodic or cathodic electrical current to generate micro-scrubbing gas bubbles that dislodge microscopic smut and embedded soils right before acid activation.
While acids are required to dissolve rust and mill scale, uninhibited acid attacks the exposed base metal, causing pitting, dimensional loss, and hydrogen embrittlement. Mepco inhibitors selectively halt acid attack once the scale is removed, preserving substrate integrity.
Our pre-treatment chemistries are widely utilized across automotive component stamping, fastener manufacturing, sanitary fittings, general hardware, and heavy machine fabrication.
Yes, all Mepco chemical processes are manufactured under strict compliance protocols backed by our ISO 9001:2000 certification, ensuring batch-to-batch consistency and high performance.
MEPCO’s pre-treatment systems deliver rapid oil emulsification, complete oxide removal, and built-in base-metal protection against over-etching, hydrogen embrittlement, and flash rusting between rinse stages.